Water table
Description
The water table (piezometric line) can be defined for a given cross-section under Cross-section > Optional properties > Water table.
Displayed as a blue polyline.
Interface
| Column | Description |
|---|---|
| Index | Point indexes starting from 1 (slope toe) to N (last boundary point). |
| Vertical position (Z) | Z coordinate of a corresponding bench line, where the point lies (fixed to bench Z position). |
| X | Horizontal coordinate of a point (editable). |
Desciption of water table elements in the UI.
Usage
- Click on Draw button.
- On the visualiser, hover over a desired bench line and select a point.
- Close the piezometric line by selecting the last point on the boundary.
- To confirm, click Enter, or ESC to cancel.
Note
- The first point at the toe is automatically assigned.
- A single point is allowed per bench.